OIL COOLED MAXIMUM STABILITY

The 1100 MS (Maximum Stability) Oil Load Series has been specifically designed for the Semiconductor and ISM industry of operation at 13.56 MHz.  The MS oil loads will provide typical stability at 13.56MHz of less than 1% (.043 dB) change in VSWR over their full respective power ranges. These loads demonstrate the same reliability that all Altronic dummy loads are known for around the world.  While providing better RF characteristics than what has previously been available, these loads also have better RF stability under full power.  By utilizing Power Film Systems’ low TCR proprietary resistors along with higher performing cooling dielectric oil, these loads provide superior results not seen in the industry.

Model 1101MS

Power Rating: 1 KW
Impedance: 50 ohms nominal
Freq. Range: DC to 60 MHz
VSWR @ 13.56 MHz: < 1.05:1; < 1.1 up to 60 MHz
Input Connectors: QC or Stub
AC Power Required: N/A
Nominal Dimensions (incl. conn.): 17″ x 8″ x 10 1/2″
Nominal Weight: 33 lbs.
Finish:  Blue Powder Coat
Model 11015MS
Power Rating: 1.5 KW
Impedance: 50 ohms nominal
Freq. Range: DC to 60 MHz
VSWR @ 13.56 MHz: < 1.05:1; < 1.1 up to 60 MHz
Input Connectors: QC or Stub
AC Power Required: N/A
Nominal Dimensions (incl. conn.): 14 1/2″ x 7 1/2″ x 18″
Nominal Weight: 45 lbs.
Finish:  Blue Powder Coat
Model 11025MS
Power Rating: 2.5 KW
Impedance: 50 ohms nominal
Freq. Range: DC to 60 MHz
VSWR @ 13.56 MHz: < 1.05:1; < 1.1 up to 60 MHz
Input Connectors: QC or Stub
AC Power Required: N/A
Nominal Dimensions (incl. conn.): 22″ x 7 1/2″ x 18″
Nominal Weight: 58 lbs.
Finish:  Blue Powder Coat
Model 1105MS
Power Rating: 5 KW
Impedance: 50 ohms nominal
Freq. Range: DC to 60 MHz
VSWR @ 13.56 MHz: < 1.05:1; < 1.1 up to 60 MHz
Input Connectors: 1-5/8″EIA, 3-1/8″EIA, QC (power is limited with QC depending on connector)
AC Power Required: N/A
Nominal Dimensions (incl. conn.): 31″ x 10″ x 28″
Nominal Weight: 146 lbs.
Finish:  Blue Powder Coat
Model 1110MS
Power Rating: 10 KW
Impedance: 50 ohms nominal
Freq. Range: DC to 60 MHz
VSWR @ 13.56 MHz: < 1.05:1; < 1.1 up to 60 MHz
Input Connectors: 1-5/8″EIA, 3-1/8″EIA, QC (power is limited with QC depending on connector)
AC Power Required: 115-240 VAC 60 Hz (50 Hz available)
Nominal Dimensions (incl. conn.): 32″ x 10″ x 34 1/2″
Nominal Weight: 172 lbs.
Finish:  Blue Powder Coat

The 1100MS (Maximum Stability) Series has been specifically designed for the Semiconductor and ISM industry of operation at 13.56 MHz in the frequency range from DC to 60 MHz.