Oil Cooled RF High Performance Series

Also available:  Maximum Stability Oil Loads and UHF Digital Oil Loads

 

The 1100 Series Oil Cooled RF Loads demonstrate the same reliability that all Altronic dummy loads are known for around the world.  While providing better RF characteristics than what has previously been available, these loads also have better RF stability under full power.  By utilizing Power Film Systems’ low TCR proprietary resistors along with higher performing cooling dielectric oil, these loads provide superior results not seen in the industry.

A thermal interlock is a standard feature on these loads and will automatically shut down the transmitter when properly connected if an overheat condition occurs.

1100 HP Series Specifications

1100 Series Oil Loads Manual

 

  

Model 1101D 1 kW

Model 1101HP

Power Rating: 1 KW
Impedance: 50 ohms nominal
Freq. Range: DC to 1 GHz
VSWR: < 1.1:1 @ operating temp. (above 1 GHz consult factory)
Input Connectors: QC or Stub
AC Power Required: N/A
Nominal Dimensions (incl. conn.): 17″ x 8″ x 10 1/2″
Nominal Weight: 33 lbs.
Finish:  Blue Powder Coat

 

Model 11015Model 11015HP
Power Rating: 1.5 KW
Impedance: 50 ohms nominal
Freq. Range: DC to 1 GHz
VSWR: < 1.1:1 @ operating temp. (above 1 GHz consult factory)
Input Connectors: QC or Stub
AC Power Required: N/A
Nominal Dimensions (incl. conn.): 14 1/2″ x 7 1/2″ x 18″
Nominal Weight: 45 lbs.
Finish:  Blue Powder Coat

 

Model 11025Model 11025HP
Power Rating: 2.5 KW
Impedance: 50 ohms nominal
Freq. Range: DC to 1 GHz
VSWR: < 1.1:1 @ operating temp. (above 1 GHz consult factory)
Input Connectors: QC or Stub
AC Power Required: N/A
Nominal Dimensions (incl. conn.): 22″ x 7 1/2″ x 18″
Nominal Weight: 58 lbs.
Finish:  Blue Powder Coat

 

Model 1105Model 1105HP
Power Rating: 5 KW
Impedance: 50 ohms nominal
Freq. Range: DC to 1 GHz
VSWR: < 1.1:1 @ operating temp. (above 1 GHz consult factory)
Input Connectors: 1-5/8″EIA, 3-1/8″EIA, QC (power is limited with QC depending on connector)
AC Power Required: N/A
Nominal Dimensions (incl. conn.): 31″ x 10″ x 28″
Nominal Weight: 146 lbs.
Finish:  Blue Powder Coat

 

Model 1110Model 1110HP
Power Rating: 10 KW
Impedance: 50 ohms nominal
Freq. Range: DC to 1 GHz
VSWR: < 1.1:1 @ operating temp. (above 1 GHz consult factory)
Input Connectors: 1-5/8″EIA, 3-1/8″EIA, QC (power is limited with QC depending on connector)
AC Power Required: 115-240 VAC 60 Hz (50 Hz available)
Nominal Dimensions (incl. conn.): 32″ x 10″ x 34 1/2″
Nominal Weight: 172 lbs.
Finish:  Blue Powder Coat