Oil Cooled Maximum Stability Series

Also available:  High Performance RF Oil Loads and UHF Digital Oil Loads.

 

The 1100 MS (Maximum Stability) Series has been specifically designed for the Semiconductor and ISM industry of operation at 13.56 MHz.  The MS load series will provide typical stability at 13.56MHz of less than 1% (.043 dB) change in VSWR over their full respective power ranges. These loads demonstrate the same reliability that all Altronic dummy loads are known for around the world.  While providing better RF characteristics than what has previously been available, these loads also have better RF stability under full power.  By utilizing Power Film Systems’ low TCR proprietary resistors along with higher performing cooling dielectric oil, these loads provide superior results not seen in the industry.

1100 MS Series Specifications

1100 MS Series Oil Loads Manual

 

Model 1101Model 1101MS
Power Rating: 1 KW
Impedance: 50 ohms nominal
Freq. Range: DC to 60 MHz
VSWR @ 13.56 MHz: < 1.05:1; < 1.1 up to 60 MHz
Input Connectors: QC or Stub
AC Power Required: N/A
Nominal Dimensions (incl. conn.): 17″ x 8″ x 10 1/2″
Nominal Weight: 33 lbs.
Finish:  Blue Powder Coat

 

Model 11015Model 11015MS
Power Rating: 1.5 KW
Impedance: 50 ohms nominal
Freq. Range: DC to 60 MHz
VSWR @ 13.56 MHz: < 1.05:1; < 1.1 up to 60 MHz
Input Connectors: QC or Stub
AC Power Required: N/A
Nominal Dimensions (incl. conn.): 14 1/2″ x 7 1/2″ x 18″
Nominal Weight: 45 lbs.
Finish:  Blue Powder Coat

 

Model 11025

Model 11025MS

Power Rating: 2.5 KW
Impedance: 50 ohms nominal
Freq. Range: DC to 60 MHz
VSWR @ 13.56 MHz: < 1.05:1; < 1.1 up to 60 MHz
Input Connectors: QC or Stub
AC Power Required: N/A
Nominal Dimensions (incl. conn.): 22″ x 7 1/2″ x 18″
Nominal Weight: 58 lbs.
Finish:  Blue Powder Coat

 

Model 1105Model 1105MS
Power Rating: 5 KW
Impedance: 50 ohms nominal
Freq. Range: DC to 60 MHz
VSWR @ 13.56 MHz: < 1.05:1; < 1.1 up to 60 MHz
Input Connectors: 1-5/8″EIA, 3-1/8″EIA, QC (power is limited with QC depending on connector)
AC Power Required: N/A
Nominal Dimensions (incl. conn.): 31″ x 10″ x 28″
Nominal Weight: 146 lbs.
Finish:  Blue Powder Coat

 

Model 1110Model 1110MS
Power Rating: 10 KW
Impedance: 50 ohms nominal
Freq. Range: DC to 60 MHz
VSWR @ 13.56 MHz: < 1.05:1; < 1.1 up to 60 MHz
Input Connectors: 1-5/8″EIA, 3-1/8″EIA, QC (power is limited with QC depending on connector)
AC Power Required: 115-240 VAC 60 Hz (50 Hz available)
Nominal Dimensions (incl. conn.): 32″ x 10″ x 34 1/2″
Nominal Weight: 172 lbs.
Finish:  Blue Powder Coat