6500 SERIES DUMMY LOADS

The 6500GS series models are economical air-cooled terminators for 50-ohm coaxial transmission line systems. Manufacturers of transmitters, microwave components and power tubes as well as transmitting stations can be assured of ideal dummy load conditions during designing, testing, adjusting and aligning of transmitters or components. The rugged, precision-designed configuration of the 6500 Series provides reliability, serviceability, safety, convenience and economy well-suited for today’s modern RF application.

MODEL 6515GS

Power Rating: 15kW continuous duty
Impedance: 50 ohms nominal
Frequency Range: DC to 110Mhz (Optional 220 MHz consult factory)
VSWR: 1.15:1 Max.
Input Connectors: 1 5/8″ or 3 1/8″ EIA Flange or Unflanged (others available)
AC Power Required: 115/230V, 50/60 Hz
Nominal Dimensions (Including Conn.): 40.6 cm x 40.6 cm x 104 cm (16″ x 16″ x 41″ H)
Nominal Weight: 42 lbs. (19 kg)

MODEL 6525GS 

Power Rating: 25kW continuous duty
Impedance: 50 ohms nominal
Frequency Range: DC to 110Mhz (Optional 220 MHz consult factory)
VSWR: 1.15:1 Max.
Input Connectors: 1 5/8″ or 3 1/8″ EIA Flange or Unflanged (others available)
AC Power Required: 115/230V, 50/60 Hz
Nominal Dimensions (Including Conn.): 40.6 cm x 40.6 cm x 162.5 cm (16″ x 16″ x 64″ H)
Nominal Weight: 64 lbs. (29 kg)

MODEL 6510-6515 

Power Rating: 10-15kW continuous duty
Impedance: 50 ohms nominal
Frequency Range: DC to 110Mhz (Optional 220 MHz consult factory)
VSWR: 1.10:1 Max.
Input Connectors: 1 3/8″ or 3 1/8″ EIA Flange or Unflanged (others available)
AC Power Required: 115/230V, 50/60 Hz

  • Stable VSWR
  • Thermal Interlock
  • Silver contacts on special film resistors eliminate resistor failure
  • Economical
  • Standby option available